Top 7 Epoxy Barrier Coat of 2022

Bestseller No. 1
TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray, Gallon)
  • High-build two part epoxy primer and barrier coat for use above and below the waterline
  • Excellent for gelcoat blister prevention and repair work on fiberglass boats
  • Provides superior protection on all underwater metals
  • Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
  • Available in your choice of White or Gray in Quart or Gallon size kits. Coverage: 225 sq. ft. per gallon (at 7 mils wet, not accounting for waste)
SaleBestseller No. 2
Interlux Y2000EKIT/QT InterProtect 2000E Epoxy Primer - Gray Kit, Quart
  • Superior adhesion to all common yacht substrates
  • Formulated to protect metal against corrosion and oxidation and repair gelcoat blistering
  • Addition of Micro-Plates technology avoids heavy water absorption and blistering problems
  • Use above and below the waterline
  • Easy to apply and dries quickly, no sanding required
Bestseller No. 3
TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray)
  • High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints
  • Provides superior corrosion protection on all underwater metals
  • Fast drying, with no sanding needed between coats
  • For use above and below the waterline
  • Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200
Bestseller No. 4
West System 422-16 Barrier Coat Additive - 16 Oz
  • Barrier Coat Additive
  • A proprietary blend designed to improve cured epoxy's moisture-exclusion effectiveness.
  • Also increases epoxy's abrasion resistance and is an excellent additive for providing barrier coating to help prevent gelcoat blistering.
Bestseller No. 6
TotalBoat Epoxy Primer Thinner 200 Marine Solvent (Quart)
  • Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy Primer systems.
  • Perfect for brush, roller, or spray applications
  • Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint
  • Makes it easy to remove paint from tools and equipment after painting is done
  • Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified
Bestseller No. 7
TotalBoat-409337 TotalFair Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (Gallon Kit)
  • HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER smooths out the rough spots and fills the voids; ideal for filling and fairing dents, holes and gouges on your boat, canoe or other watercraft. Marine-grade putty is also great for home, rv and auto repair
  • SUPER SMOOTH FINISH FOR PERMANENT, WATERPROOF REPAIRS: Marine filler bonds strongly to damaged areas and cures without pinholes on wood, aluminum, steel and fiberglass repair areas; cured TotalFair is waterproof; use above and below the waterline
  • EASY TO MIX AND APPLY: Foolproof 1 to 1 mix ratio - just mix the blue and yellow components until they turn green. Creamy smooth consistency makes it easy to spread and feather to a fine edge; won't sag on vertical and overhead surfaces
  • CURES FAST. EASY TO SAND AND PAINT: Quick-drying compound is ready to sand in just 3 hours at 80°F; cured fairing compound sands easily; compatible with latex and epoxy primers and paints
  • CHOOSE KIT SIZE: 2-PINT KIT, 2-QUART KIT or 1-GALLON KIT. NOTE: TotalBoat Gelcoat should not be applied directly over TotalFair or gelcoat will not cure properly. Before applying gelcoat, apply TotalBoat 2-Part Epoxy Primer or TotalProtect over TotalFair

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment

Your email address will not be published.