Top 7 Radial Arm Saw of 2022

SaleBestseller No. 1
DEWALT 12-Inch Miter Saw, 15-Amp, Single Bevel, Compound (DWS715)
  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops
  • The mitre saw features the precise miter system and machined base fence support
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree
Bestseller No. 2
Oshlun LG-R01 Radial Arm Saw Laser Guide
  • Fits most radial arm saws and saws with a threaded 5/8-Inch arbor shaft
  • New recessed laser design to protect the laser from hitting the material on deep cuts
  • New thinner design to fit more saws
  • New brighter and more accurate laser line
  • Includes extra set of LR44 batteries
SaleBestseller No. 3
Metabo HPT 10-Inch Miter Saw | Single Bevel | Compound | 15-Amp Motor | C10FCGS
  • MOTOR: 15 Amp motor delivers high power for the toughest of cuts generating a no-load speed of up to 5,000 RPM
  • LIGHTWEIGHT: Only 24.2 lbs. to facilitate maneuverability and portability
  • MITER ANGLE RANGE: 0-52 degrees, to the right and left for increased flexibility
  • BEVEL RANGE: 0-45 degrees, to the left with adjustable bevel stops for precision cuts
  • LARGE TABLE: Offers better material support with vice clamping system to secure work piece
Bestseller No. 4
Yellow Safety Switch Key Compatible with Craftsman Radial Arm Jointer Band Drill Sears Table Saw, Sander, Band Saw, Drill Press Parts- Oval (2pcs-pack)
  • This key is an OEM injection molded part. It is not a 3D printed copy.
  • This Safety Key fits many Sears Craftsman Rocker Style, Power Switchs used on many models of Craftsman power tools.
  • Key head is and approximate 7/8" in diameter but is slightly oval shaped. The longest leg is about 15/16" and the short leg is about 5/8" long.
  • Sears sold this key under several part numbers including 22255, 60256, and 976863-001.
  • The last picture shows the key installed in a typical switch. This listing is for the KEY ONLY
SaleBestseller No. 5
DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)
  • Stainless steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree
  • 0 degree - 50 degree left and right miter capacity. Power Tool Type : Corded.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles
SaleBestseller No. 6
ENGiNDOT Sliding Miter Saw, 10-Inch Single Bevel Compound Miter Saw with 15-Amp Motor, Double Speed (4500 & 3200 RPM), Laser Guide, 3 Blades, Bevel Cut (0°- 45°) for Wood, PVC or Soft Metal Cutting
  • 3 Blades & Powerful Motor: The ENGiNDOT sliding miter saw comes with 3 blades, two 10" 40T TCT blades for wood and plastic, and one multi-functional 10" 48T TCT blade for versatile use. Richer accessories provide a wide range of choice for your operation. Powerful 15-amp, 2000 Watt motor gives more power and durability.
  • 2 Adjustable Speed & Grand Cutting Capacity: By pressing the switch, you can convert between the two speeds (3200 RPM or 4500 RPM) effortlessly for more precise cutting, high speed for wood while low speed for metal and plastic, giving your cutting more choices. The max cutting capacity up to 3.54 x 13.19 inches at 90 degree and 1.77 x 13.19 inches at 45 degree, offers more possibilities for your work.
  • Bevel Cutting & Iron Blade Guard: The free bevel range from 0° to 45° allows you to do bevel cutting for more purposes. The angle of the miter table is -45°/ 0°/ + 45° and the positive angles in all these directions are 0°, 15°, 22.5°, 30° and 45° respectively. Solid iron self-retracting saw shield is more durable than other plastic and transparent saw shield, the teeth cover of the cutting blade can protect you from accidental mishaps.
  • Laser Guide: This 10-Inch single bevel compound miter saw equipped with laser guide, it can attached to accurately track real-time position and allows you to perform precise cutting.
  • What You Get: 1* ENGiNDOT sliding miter saw, 1* 10" multi-function blade, 2* 10" blades for wood, 1* M3 allen wrench, 1* dual-head wrench, 2* side support (packed on the machine), 1* clamping device (packed on the machine), 1* user manual, 1* dust bag.
Bestseller No. 7
Boloniprod 2 Pack Featherboard Double Feather Loc Board Adjustable Woodworking Safety Device Feather-Loc for Stationary Power Cutting Tools Table Saw Radial-Arm Saw Router Table (Yellow)
  • 【13 Angled Fingers】: Featherboard are Made from a HIGH-TECH POLYMER and each one has 13 ANGLED FINGERS that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.Featherboards is made from durable plastic and it will stand up to years of heavy use in your woodshop
  • 【Professional & Safe】: The feather loc board can fix the wood sturdily to prevent bounce, so it is safer to use the feather board, and you don't need put your hands too close to the saw blade during the woodworking. Not only will Feather-loc protect your hands, it also helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw.
  • 【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more.
  • 【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork.
  • 【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherboard is a very professional woodworking tool that can be used for flip engraving machines, electric circular saws, table saws, band saws, etc.Every woodworker needs a professional featherboard,The featherboard works to keep workpiece press up against the fence whole time when you are cutting

As an Amazon Associate I earn from qualifying purchases.

Leave a Comment

Your email address will not be published.